For the type of end mill, see Ball nose cutter
A ball mill
is a type of grinder
used to grind and blend materials for use in mineral dressing processes, paints, pyrotechnics, ceramics and selective laser sintering
. It works on the principle of impact and attrition: size reduction is done by impact as the balls drop from near the top of the shell.
A ball mill consists of a hollow cylindrical shell rotating about its axis. The axis of the shell may be either horizontal or at a small angle to the horizontal. It is partially filled with balls. The grinding media is the balls, which may be made of steel ( chrome steel
), stainless steel, ceramic, or rubber. The inner surface of the cylindrical shell is usually lined with an abrasion-resistant material such as manganese steel
or rubber. Less wear takes place in rubber lined mills. The length of the mill is approximately equal to its diameter.
The general idea behind the ball mill is an ancient one, but it was not until the industrial revolution
and the invention of steam power
that an effective ball milling machine could be built. It is reported to have been used for grinding flint for pottery in 1870.
In case of continuously operated ball mill, the material to be ground is fed from the left through a 60° cone and the product is discharged through a 30° cone to the right. As the shell rotates, the balls are lifted up on the rising side of the shell and then they cascade down (or drop down on to the feed), from near the top of the shell. In doing so, the solid particles in between the balls and ground are reduced in size by impact.
The ball mill is used for grinding materials such as coal, pigments, and feldspar for pottery. Grinding can be carried out either wet or dry but the former is performed at low speed. Blending of explosives is an example of an application for rubber balls. For systems with multiple components, ball milling has been shown to be effective in increasing solid-state
chemical reactivity. Additionally, ball milling has been shown effective for production of amorphous materials.
A ball mill, a type of grinder
, is a cylindrical device used in grinding (or mixing) materials like ores
, chemicals, ceramic raw materials and paints. Ball mills rotate around a horizontal axis, partially filled with the material to be ground plus the grinding medium. Different materials are used as media, including ceramic
pebbles and stainless steel
balls. An internal cascading effect reduces the material to a fine powder. Industrial ball mills can operate continuously, fed at one end and discharged at the other end. Large to medium-sized ball mills are mechanically rotated on their axis, but small ones normally consist of a cylindrical capped container that sits on two drive shafts ( pulleys
and belts are used to transmit rotary motion). A rock tumbler
functions on the same principle. Ball mills are also used in pyrotechnics
and the manufacture of black powder
, but cannot be used in the preparation of some pyrotechnic mixtures such as flash powder
because of their sensitivity to impact. High-quality ball mills are potentially expensive and can grind mixture particles to as small as 5 nm
, enormously increasing surface area and reaction rates.
The grinding works on the principle of critical speed. Critical speed can be understood as that speed after which the steel balls (which are responsible for the grinding of particles) start rotating along the direction of the cylindrical device; thus causing no further grinding.
Ball mills are used extensively in the mechanical alloying
in which they are not only used for grinding but for cold welding as well, with the purpose of producing alloys from powders. Mechanical Alloying Technology
, Institute of Materials Processing
The ball mill is a key piece of equipment for grinding crushed materials, and it is widely used in production lines for powders such as cement, silicates, refractory material, fertilizer, glass ceramics, etc. as well as for ore dressing
of both ferrous and non-ferrous metals. The ball mill can grind various ores and other materials either wet or dry. There are two kinds of ball mill, grate type and overfall type due to different ways of discharging material. Many types of grinding media are suitable for use in a ball mill, each material having its own specific properties and advantages. Key properties of grinding media are size, density, hardness, and composition.
::::::::::* Size: The smaller the media particles, the smaller the particle size of the final product. At the same time, the grinding media particles should be substantially larger than the largest pieces of material to be ground.
::::::::::* Density: The media should be denser than the material being ground. It becomes a problem if the grinding media floats on top of the material to be ground.
::::::::::* Hardness: The grinding media needs to be durable enough to grind the material, but where possible should not be so tough that it also wears down the tumbler at a fast pace.
::::::::::* Composition: Various grinding applications have special requirements. Some of these requirements are based on the fact that some of the grinding media will be in the finished product. Others are based in how the media will react with the material being ground.
::::::::::** Where the color of the finished product is important, the color and material of the grinding media must be considered.
::::::::::** Where low contamination is important, the grinding media may be selected for ease of separation from the finished product (i.e.: steel dust produced from stainless steel media can be magnetically separated from non-ferrous products). An alternative to separation is to use media of the same material as the product being ground.
::::::::::** Flammable products have a tendency to become explosive in powder form
. Steel media may spark, becoming an ignition source for these products. Either wet-grinding, or non-sparking media such as ceramic
must be selected.
::::::::::** Some media, such as iron, may react with corrosive materials. For this reason, stainless steel
, ceramic, and flint
grinding media may each be used when corrosive substances are present during grinding.
The grinding chamber can also be filled with an inert shield gas
that does not react with the material being ground, to prevent oxidation or explosive reactions that could occur with ambient air inside the mill.
Advantages of the ball mill
. Property of Faculty of Chemistry, Gdańsk University of Technology]]
Ball milling boasts several advantages over other systems: the cost of installation and grinding medium is low; it is suitable for both batch and continuous operation, similarly it is suitable for open as well as closed circuit grinding and is applicable for materials of all degrees of hardness.
Aside from common ball mills there is a second type of ball mill called a planetary ball mill
. Planetary ball mills are smaller than common ball mills and mainly used in laboratories for grinding sample material down to very small sizes. A planetary ball mill consists of at least one grinding jar which is arranged eccentrically on a so-called sun wheel. The direction of movement of the sun wheel is opposite to that of the grinding jars (ratio: 1:-2 or 1:-1).
The grinding balls in the grinding jars are subjected to superimposed rotational movements, the so-called Coriolis forces. The difference in speeds between the balls and grinding jars produces an interaction between frictional and impact forces, which releases high dynamic energies. The interplay between these forces produces the high and very effective degree of size reduction of the planetary ball mill.